Mantle Clock Movement Instruction Manual

Instructions for Hermle Mantel Clocks with Mechanical 4/4 Westminster Chime W0340 or 4/4 Triple Chime Movement W1050 1) Unpack the clock Take clock and key carefully out of carton. 2) Transportation securing device Open the back door. Remove carefully all packaging material and securing devices such as rubber, foam, paper, etc. Please cut rubber band with a pair of scissors. Open front door and remove the plastic safety bushing (see picture 2). Save the packing in case the clock needs to be returned.

Instructions Manual for Howard Miller Mantel Clock 613467. Instruction Manual: Quartz Chime Movement. START CLOCK: If the clock movement has a 'start-Stop.

Honda cr85 for sale. If you are looking for the ebook 2018 honda cr 85 repair manual in pdf format, then you have come on to the faithful website. We present complete variation of. If you are looking for a ebook 2018 honda cr85r service manual in pdf format, in that case you come on to the loyal website. We present full version of this ebook.

  • WALL AND MANTEL CLOCK INSTRUCTION MANUAL. MANTEL CLOCKS. Access to the clock movement and chimes is made through the back of the clock.
  • Mantel Clocks Antique Clocks Atomic Clocks Clock Owners Manuals Clock Brands Clock Repair Clock. Clock Manual with Westminster and Whittington.

3) Winding the clock Please wind your clock fully every 7 days for optimum performance (the clock will actually run about 8 - 9 days on one winding). To wind the clock use the enclosed key. Turn key clockwise until it stops (about 3 1/2 turns on the left winder and about 4 1/2 turns on center and right winder. The center winder is for the timekeeping, the right winder is for the quarter-hour chime, and the left winder is for the hour strike. 4) Chime a) 4/4 Westminster Chime movement Your clock chimes the Westminster melody every 15 minutes.

The chime shut-off is located inside the back of the clock case at the right side of the movement (see photo 1) with a red plastic bushing. Lever up = chime Lever down = silent b) 4/4 triple chime movement Your clock chimes every 15 minutes according to your chosen melody as selected by the shift lever shown in picture 2. Never move the shift lever while the clock is chiming! The chime is off if you push the shift lever to the silent (top) position.

5) Setting the clock The minute hand (long hand) may be moved clockwise or counterclockwise to set the clock to the correct time. Never turn the hour (short) hand, it moves automatically. After two hours the chimes will be automatically synchronized. 6) Regulating the clock To make the clock go slower or faster, turn the regulating screw that is shown in the upper right of picture 3. To make clock go faster: turn screw counterclockwise To make clock go slower: turn screw clockwise. Picture 1 showing location of chime shutoff lever for Westminster chime models Picture 2 showing location of safety bushing to remove when setting up clock, and location of chime shift lever on triple chime models Picture 3 showing the regulator for adjusting the timekeeping.

The screw at the very top right is turned with a screwdriver. Make only a small adjustment each time (about 1/16 of a turn). Clockwise = slower Counterclockwise = faster.

Seiko Westminster - Whittington Chime movement owners instructions Your resource for information about clocks Seiko Chiming Clock Manual with Westminster and Whittington Chimes Seiko Westminster - Whittington Chime movement owners instructions 1. NAMES AND LOCATION OF OPERATIONAL PARTS 1 - Hands setting disk 2 - Night time silencer 3 - Chime melody switch 4 - Volume control disk 2. HOW TO SET THE BATTERY Be sure the 'C' size battery is in the correct position with the position polarity in the upward position. HOW TO SET THE TIME Turn the hands setting disk (1) counter - clockwise to set the the time. The hands will move clockwise. HOW TO CONTROL THE VOLUME Every time the chime - melody selector switch (3) is shifted, the corresponding chime will start to ring. You may adjust the chime volume by turning the volume control disk (4) toward max for louder or toward the 'min' position for a softer level.

Sessions mantle clock movementInstallation

HOW TO SELECT A CHIME MELODY Every time the chime selector switch is moved, the corresponding chime will start to ring. Select the chime you wish to hear. The left position is Westminster and the right is Whittington.

The chime will sync correctly and play the Westminster quarter hour chimes after the clock has been running 90 minutes. If your chime doesn't count the correct hour: 1) Take out the battery 2) Set the time to 5:50 AM 3) Replace the battery in the cavity. 4) Set the time with the hands moving clockwise to the correct time.

Large Clock Movement

5) The chime will sync correctly and play the quarter hour chimes after the clock has been running 90 minutes. HOW TO SET THE NIGHT TIME SILENCER The Night Time Silencer switch has 3 positions. If you wish for the chime to play 24 hours, keep it in the left position. If you wish for the chime to shutoff automatically every night at 11:00 PM and come back on at 5:45 AM, please proceed as follows: a) set your clock to the current correct time if you have not already done so. B) if the current time is during the AM hours, slide switch (2) to the middle position marked 'AM' c) if the current time is during the PM hours, slide switch (2) to the right position marked 'PM' The clock will now be silent by shutting off automatically every night at 11:00 PM and come back on at 5:45 AM. The shutoff period cannot be changed.

Clock Movement Amazon

Sessions mantle clock movement

HOW TO HANG THE PENDULUM a) Move the pendulum hanger to the right to release it. It will 'pop' out of the shipping position. B) Attach the pendulum to the hanger as shown.

C) After hanging the clock, give the pendulum a gentle push to start it swinging or slightly move the bottom of the case from left to right to start the swinging motion. Grandfather Clocks 123 - © - All Rights Reserved.